Attach The Guard; Assemble The Shaft - GreenWorks Pro 2103902CT Manual Del Operador

2
2. The edge guide can be flipped to the side for
storage.
7.3

ATTACH THE GUARD

WARNING
Do not touch the cut-off blade.
1. Remove the screws (1) from the trimmer head with
a Phillips head screwdriver (not included).
1
2. Put the guard onto the trimmer head.
3. Align the screw holes on the guard with the screw
holes on the trimmer head.
English
4. Tighten the screws.
7.4

ASSEMBLE THE SHAFT

1. Loosen the knob (1) on the coupler.
2. Push in the release button (2) on the lower shaft (3).
3. Align the release button (2) with the positioning hole
(4) and slide the two shafts.
2
3
4. Turn the lower shaft until the button locks into the
positioning hole.
2
5. Tighten the knob.
Tighten
7
4
5
1
Loosen
EN