Adjust The Cutting Diameter; Line Cut-Off Blade; Attach Machine To Shoulder Strap; Operation Tips - GreenWorks Pro ST60L03 Manual Del Operador

9.4 ADJUST THE CUTTING
DIAMETER
The machine is set at a 14 in. (35.6 cm) cutting diameter.
You can adjust to a 16 in. (40.6 cm) cutting diameter.
Set the cutting diameter to 14 in. (35.6 cm) for greater
runtime and 16 in. (40.6 cm)for a larger cutting area.
1. Remove the battery pack.
2. Remove the blade screws from the cut-off blade (17).
3. Turn the cut-off blade 180°.
4. Tighten the blade screws with the Allen key.
17
180°
9.5

LINE CUT-OFF BLADE

This trimmer is equipped with a line cut-off blade (17) on the
guard. The line cut off blade continuously trims the line to
ensure a consistent and efficient cut diameter. Advance line
whenever you hear the motor running faster than normal, or
when trimming efficiency diminishes. This will maintain best
performance and keep line long enough to advance properly.
NOTE
English
9.6 ATTACH MACHINE TO
SHOULDER STRAP
①
1. Attach the carabiner to the carrying ring on the drive
tube.
2. Put on the shoulder strap.
3. Adjust the length of the strap so that the carabiner is
about a hand's width below your right hip.
9.7

OPERATION TIPS

Keep clearance between the body and the machine.
Do not operate the machine without guard in place.
Do these tips when you use the machine
• Keep a firm hold with the two hands on the machine
while the string head is spinning.
• Cut tall grass from the top down.
If grass winds around the trimmer head:
9
②
②
①
②
WARNING
WARNING
EN
①