Conformity: European standards EN 60598-1, EN 60598-2-1, EN 60598-2-2.
Community Directives LV 73/23, EMC 89/336 and EEC 93/68.
IP 20
IP 40
Attention: Keep these instructions carefully for future consultation.
Modifying the luminaire in any way invalidates the guarantee of conformity with current standards and directives.
Connections of type Y. Flexible cable outside the luminaire.
If the fl exible cable requires replacement, it should be replaced only by the Reggiani SpA Service Centre or by equivalent
qualifi ed personnel in order to avoid hazards.
Degree of protection. Halogen lamp version and Reggiani track-mounted luminaires
Degree of protection. Ceiling-mounted luminaires for metal halide lamps
Direct mounting on normally infl ammable surfaces.
Never cover the luminaire with insulating material and do not recess it.
Minimum distance from the object to be illuminated.
Safety shields must be replaced if damaged.
Luminaires must not be turned on without safety shields.
Luminaires in Class I.
Connect the yellow/green earth wire.
Luminaires in Class II. Use H05V2V2 multipolar cables with a diameter of between 1.5mm
2.00mm
to connect to mains
2
Self-ballasting lamps do not require safety shields.
Use UV-Stop lamps only.
The symbol indicates that the luminaire is subject to a voltage surge of 4.5 kV when the lamp
is turned on. Great attention must therefore be paid when installing the luminaire and when
replacing the lamp to avoid all risks from the supply voltage.
UK
and
2
19
