Technical Data; Machine Features; Switch On/Off; Operation - Festool T 15+3 Li Manual De Instrucciones

PSC 420 EB
GB
4

Technical data

Cordless jigsaws
Motor voltage
Stroke speed
Stroke length
Pendulum stroke
max. inclination (only with accessory angle
table WT-PS 400)
max. cutting depth (depending on saw blade)
Weight without battery pack
Safety class

Further technical data on the charger and battery packs can be found on page 7.
5

Machine features

[1-1] Chip guard
[1-2] On/Off switch
[1-3] Variable speed trigger (only PSBC 420 EB)
[1-4] Switch lock (only PSBC 420 EB)
[1-5] Adjusting wheel for stroke speed control
[1-6] Buttons for releasing the battery pack
[1-7] Extractor connector
[1-8] Saw table change lever
[1-9] Saw blade ejection
[1-10] Replaceable saw table
[1-11] Pendulum stroke switch
[1-12] Base runner
[3-1] LED-Display
[3-2] Cable holder
[3B] Wall mount for charger
The specified illustrations appear at the beginning
of the Operating Instructions.
6

Operation

6.1 Charger cable holder [3-2]
Unwind the cable completely from the recess
before using the charger.
6.2 Changing the battery pack [2]

The cordless jigsaws can be charged using any
Festool battery pack from the BPC series.
Risk of injury! Always remove the belt clip
from battery packs from the BPC series pri-
or to use.
18
PSC 420 EB
1500 - 3800 rpm
Wood
Aluminium
Steel
6.3
The electric power tool has one button [1-2] on
each side for switching on/off.
The PSBC 420 EB also has a variable speed trigger
[1-3] with switch lock [1-4]. For continuous opera-
tion, use the button [1-2].
6.4

The battery pack is delivered partially charged.
To guarantee the full battery power, charge it
completely before using it for the first time.
The LED [3-1] on the charger indicates the respec-
tive operating status of the charger.
PSBC 420 EB
10,8 - 18 V
1000 - 3800 rpm
26 mm
4 steps
45° to both sides
120 mm
20 mm
10 mm
1,8 kg
/II

Switch on/off

Charging the battery pack [3A]
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Battery pack is charged to maxi-
mum capacity.
LED green - flashing slowly
Battery pack is charged with
reduced current. Li-ion is
charged to 80 %.
LED green - lit continuously
Charging process has finished or
will not resume because the cur-
rent charging state is more than
80%.
LED red - flashing
General fault indicator, e.g.
incomplete contact, short circuit,
defective battery pack, etc.