Original Operating Manual 1 Symbols; Safety Instructions - Festool T 15+3 Li Manual De Instrucciones

PSC 420 EB
GB
Original operating manual
1 Symbols................................................ 16
2 Safety instructions ............................... 16
3 Intended use ........................................ 17
4 Technical data ...................................... 18
5 Machine features ................................. 18
6 Operation.............................................. 18
7 Settings ................................................ 19
8 Working with the machine ................... 20
9 Service and maintenance .................... 21
10 Accessories .......................................... 21
11 Transport.............................................. 22
12 Environment......................................... 23
13 EU Declaration of Conformity.............. 23
1 Symbols
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of with domestic waste.
Tip or advice
Handling instruction
Mains voltage (input) and frequency
Voltage (output)
Rapid charging max.
Permitted temperature range
Safety class II
Charging times
Capacity
Weight
16
2

Safety instructions

2.1 General safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2 Battery pack and charger safety instruc-
tions
- This charger can be operated by persons with re-
duced physical, sensory or mental capabilities or
a lack of practical experience and knowledge,
provided they are supervised or have been in-
structed to use the machine safely and under-
stand the dangers of machine operation.
Children are not allowed use or play with the ma-
chine.
- Do not open the battery pack or the charger!
- Prevent metal parts (e.g. metal chips) or fluids
from entering the charger!
- Do not use power adapters or battery packs
form other manufacturers to operate the cord-
less power tool. Do not use any charger from
other manufacturers for charging the battery
pack. The use of impermissible accessories may
result in electric shock and / or serious acci-
dents!
- Protect the battery pack from excessive heat > 50
°C or constant heat sources such as sunlight or
naked flames!
- Never use water to extinguish burning li-ion bat-
tery packs! Use sand or a fire blanket.
- Protect the machine from moisture.
- Protect the cable from heat, oil and sharp edges.
- Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
2.3 Machine-related safety instructions
- Hold power tool by insulated gripping surface,
when performing an operation where the cut-
ting accessory may contact hidden wiring. Cut-
ting accessory contacting "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
- Festool electric power tools must only be in-
stalled on work tables provided by Festool for
this purpose. If the tool is installed in another, or