Symbols; Safety Warnings; Machine-Specific Safety Notices For Cordless Drills - Festool CXS Manual De Instrucciones

English
Contents
1 Symbols..................................................... 14
2 Safety warnings.........................................14
3 Intended use..............................................15
4 Technical data........................................... 16
5 Machine features...................................... 16
6 Operation................................................... 16
7 Settings......................................................16
8 Tool holder, attachments..........................17
9 Working with the machine........................ 17
10 Service and maintenance..........................17
11 Environment.............................................. 18
12 Transportation...........................................18
1

Symbols

Warning of general danger
Warning of electric shock
Read the operating manual and safety
instructions.
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Do not dispose of it with domestic
waste.
Inserting the battery pack
Removing the battery pack
Tip or advice
Handling instruction
Permitted temperature range
Safety class II
Weight
Charging times
Mains voltage (input) and frequency
14
Voltage (output)
Rapid charging max.
Capacity
Number of cells
#
2

Safety warnings

2.1 General power tool safety warnings
WARNING! Read all safety warnings, in­
structions, illustrations and specifica­
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" used in the safety in­
structions refers to mains-powered power tools
(with power cable) or battery-powered power
tools (without power cable).
2.2 Machine-specific safety notices for
cordless drills
Hold the power tool by insulated gripping
-
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring. Cutting acces­
sory contacting a "live" wire may make ex­
posed metal parts of the power tool "live"
and could give the operator an electric
shock.
Use suitable detectors to determine if util­
-
ity lines are hidden in the work area or
call the lo-cal utility company for assis­
tance. Aontact with electric lines can lead
to fire and electric shock. Damaging a gas
line can lead to explosion. Pene-trating a
water line causes property damage or may
cause an electric shock.
-
Wear suitable personal protective equip­
ment: ear protection, safety goggles, a dust
mask for work which generates dust, and
protective gloves when working with raw
materials and when changing tools.
CAUTION! Power tool can block and
cause sudden kickback! Switch off imme­
diately!
- Do not lock the on/off switch permanently!