Black and Decker BCD701 Manual De Instrucciones página 48

English
Fig. F
12
13
Using the GoPak 2 in 1 battery to
charge your USB device (Fig. G)
Plug the USB A end of your device specific cable
into the BLACK+DECKER GoPak 2 in 1 battery
and the other end of the cable into a UL or CSA listed
compatible device (Phone/Tablet/MP3/Wearable/
Game Controller/etc.). Charging will start automatically.
Fig. G
11
Functionality
The BLACK+DECKER GoPak 2 in 1 battery can power your
compatible BLACK+DECKER 12V GoPak MAX* tools or
power/charge your mobile devices. The compact, slim
battery housing is designed for portability.
GoPak Charge Input: Up to 2.4A**
-
- GoPak Power Output: Up to 2.4A***
** Actual input charge rate is dependant upon power
adapter (not included).
***Actual output rate is dependant on the device.
USB Power Port
The BLACK+DECKER GoPak 2 in 1 battery is equipped with a
USB Type A power port. It delivers up to 2.4 amp total current.
nOTE: The current delivered to device is dependent on user
device and user's chosen cable.

WARNING: Ensure the terminal cap is securly
attached to the BLACK+DECKER GoPak 2 in 1 battery
when using it to power/charge your device.
• Install terminal cap on the tool terminals.
• Device charging from USB will start automatically when
device is connected.
• To turn OFF, disconnect USB device.
6
Proper Hand Position (Fig. H)

Proper hand position requires one hand on the main handle.
5
4
11
14
On/Off Button (Fig. A)
1. To turn the light on, press the on/off button
2. To turn it off, press the button again.
14
Pivoting The Light Housing (Fig. I, J)
1. The LED light housing
2. The LED flashlight can also be positioned on the battery
WARNING: To reduce the risk of serious personal injury,
ALWAYS use proper hand position as shown.
Fig. H
2
different positions within the 90 degree pivot range.
end to provide a greater range of light coverage as
shown in Figure J.
Fig. I
Fig. J
2
.
1
can be pivoted by lifting it to
2