SFS isoweld 3000 Instrucciones De Operación página 6

Safety instructions
Meaning of specific safety instructions
For certain situations the applicable safety instructions are given at the relevant
place in the operating instructions. These instructions must be observed in order
to prevent physical injury, damage or harm to the environment.
Statutory requirements
In addition to the safety instructions in this operating manual, the statutory
accident prevention and environmental protection regulations applicable in the
country of use must be observed. Likewise the generally accepted rules for
safety and working in a technically correct manner must be observed.
Consequences of failure to observe the safety instructions
Failure to observe the safety instructions can lead to accidents with resultant
physical injury, damage or harm to the environment.
The manufacturer accepts no liability for injury or damage resulting from failure
to observe the safety instructions.
Intended use
The induction welding tool has been designed exclusively for the installation of
roofing membranes recommended by SFS on roofs.
Only fasteners, stress plates and sleeves approved for the tool and provided by
SFS may be used. The tool must be used within the limits defined in the
"Technical data" section.
NOTI CE
USE ONLY SFS MARKED PLATES
Welding with plates without an SFS
stamp may result in roof assembly failure.
Foreseeable misuse
• Starting to use the tool without instruction.
• Rendering the safety features inoperative and removing the warning labels.
• Working on roofs with a slope of more than 10°.
• Working backwards on roofs.
• Unsafeguarded or reckless working on roofs.
• Modifying the tool without the permission of the manufacturer.
• Using accessories or spare parts from another manufacturer without the
permission of SFS.
• Using or wearing isoweld
ladder.
DANGER!
• In the case of misuse there is a risk of death or injury, damage to the tool
and damage to the material processed.
• It is not permitted to open the isoweld
circumstances. Non-observance involves the risk of death or injury,
damage to the tool and damage to the processed material.
6
Backpack on an unstable support, steep incline or
®
®
induction generator under any