Rolling Out The Waterproof Membrane; Marking The Fastening Points - SFS isoweld 3000 Instrucciones De Operación

5. Rolling out the waterproof membrane

• Install the waterproof membrane in accordance with the membrane
manufacturer's instructions.
Compared to seam fixing systems, the isoweld
possible to reduce the overlap of the waterproof membrane.
• Overlaps of the waterproof membrane in the area of the stress plate should
be avoided. See also the isoweld
instructions.
• Ensure that the underside of the waterproof membrane is dry.

6. Marking the fastening points

• Use the isoweld
the top of the waterproof membrane above the stress plate.
Careful marking contributes significantly to a fast welding process.
Clean magnets from debris on a regular basis to prevent membrane
damage.
44
® magnets (turning clockwise) or other suitable aids to mark
® 3000 / isoweld
system makes it
®
® Backpack operating