SKYLOTEC CLAW CL-001 Instrucciones De Uso página 11

user belongs is responsible for producing documentation and
recording all the necessary information.
11.) Regular checks
Regular checks are necessary, since the safety of the user depends
on the effectiveness and durability of the equipment. We recommend
that you keep a written record of these checks. SKYLOTEC provides
„HOMEBASE" for this purpose ('HOMEBASE' is an online PPE
Management system : https://homebase.skylotec.com ). The operator
must ensure that the climbing protection system and the runners are
checked by a qualified person, according to the manufacturer's
instructions to ensure that they are in perfect working condition. This
check should take place at least once a year or as required by legal
requirements, frequency of use, environmental conditions and
operational conditions. The legibility of product labelling should also
be checked at the same time. If the runner fails the visual and
functional check, it must be withdrawn from use immediately. If there
is any doubt, the runner can be sent to SKYLOTEC for testing. Since
textile parts are subject to ageing, in the interests of user safety, the
shock absorber must be replaced after a maximum of 10 years after
its first use.
Checklist CLAW CL-001
The gap dimension of the fall arrester is within
the permissible range (between the plates above
the brake block)
Locking knob and locking lever are easy to
move and automatically return to starting
position
The reversing stops move smoothly and prevent
the rotor from touching down incorrectly
The marking is legible
Generally no heavy wear on the rotor can be
detected
The energy absorber is not damaged/triggered
12.) Declaration of conformity
You can find
www.skylotec.com/downloads
the full declaration
yes no
□ □
□ □
□ □
□ □
□ □
□ □
of conformity at:
11