Storage; Troubleshooting - Profi Cook PC-ES 1008 Instrucciones De Servicio

WARNING:
• Rinse the water tank and let one full tank fresh
water flow through the group head to rinse out
the decalcifier residues.
• Do not use this water for making espresso.
Problem Possible cause
The appliance does The appliance has no
not function. power supply.
The appliance is faulty.
No coffee output.
The water tank is empty.
The water tank is not prop-
erly attached; the valve is
not open.
The holes in the filter holder
and the group head outlet
are blocked.
Air entrapped in the heating
circuit.
The coffee grounds are
too fine or compressed too
much.
Scale deposits in the appli-
ance.
The pump is noisy.
The water tank is empty.
The water tank is not prop-
erly attached; the valve is
not open.
Air entrapped in the water
circuit.
• Clean the appliance as instructed. Let the ac-
cessories dry completely.
• We recommend that you keep the appliance in
the original packaging if the appliance will be
not used for long periods.
• Always keep the appliance out of the reach of
children in a dry, well ventilated place.

Troubleshooting

Solution
Test the socket with another appliance.
Plug in the mains plug correctly.
Check the main circuit breaker.
Contact our service center or a specialist.
Switch the appliance off!
Fill the water tank with fresh water.
Press the tank slightly down for the valve to open.
Clean filter holder, filter and group head outlet.
Generate steam as instructed under "Making Cap-
puccino". Open the steam control knob all the way
towards " ".
Loosen the coffee grounds. Spread it evenly and
only slightly compress with the tamper.
Decalcify the appliance as instructed.
Switch the appliance off.
Fill the water tank with fresh water.
Press the tank slightly down for the valve to open.
Bleed the appliance as instructed under "First Use/
Bleeding".

Storage

63