De-Scaling; Cleaning; Storage; Troubleshooting - Profi Cook PC-KA 1152 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23

De-scaling

De-scaling is necessary when the brewing time increases
substantially.
• Use only commercially available citrus acid-based
de-scaler.
• Dose as indicated on packaging or instruction leaflet.
WARNING:
• Before cleaning, always remove the mains plug and wait until
the appliance has cooled down.
• Do not immerse the appliance in water. Otherwise this might
result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
1. First, allow the appliance to briefly cool down after use.
2. Open the water tank lid, remove the covering and let the
appliance cool down completely.
3. Remove the permanent filter insert and the striking
mechanism application.
Basic Appliance, Cover
• The exterior of the appliance should be cleaned as nec-
essary with a slightly damp cloth – without any additives.
• Remove spilled coffee grounds with a paper towel from
the inner casing. Afterwards wipe with a damp cloth.
• You can remove the disc on the underside of the cover
for cleaning. Clean the disc as usual in a rinse bath.
Place the disc back on once it has completely dried.
Problem
The appliance does not work.
PC-KA1152_IM

Cleaning

Troubleshooting

Possible cause
The appliance is not connected to mains
power.
The appliance is equipped with safety
switches. These prevent it to switch on
without the cover being in place.
The appliance is defective.
WARNING:
• Afterwards you should boil fresh water in the pot
three or four times in order to rinse out residues of the
de-scaling agent.
• Do not use any coffee powder!
• Do not use this water for consumption.
Glass Jug with Cover and Nylon Filter, Permanent Filter
Insert, Measuring Spoon
Clean the parts in a rinsing bath in the usual manner. Use a
soft brush if necessary.
Striking Mechanism Application
You can clean the striking mechanism application as usual
in a rinse bath or in the dishwasher. In particular, clean the
opening under the striking mechanism. Rinse it with plenty
of water.

Storage

• Clean the appliance as described and let it dry com-
pletely.
• We recommend that you store the appliance in its
original packaging when it is not to be used for a longer
period.
• Always store the appliance at a well ventilated and dry
place outside the reach of children.
Solution
Check the wall outlet with a different
appliance.
Insert the plug properly in the wall outlet.
Check the fuse.
Check that the cover is fitted properly.
Contact our service or a repair centre.
39
04.05.18
Tabla de contenido

Solución de problemas

loading

Tabla de contenido