Cleaning; Group Head And Rubber Seal; Accessories; Decalcification - Profi Cook PC-ES 1008 Instrucciones De Servicio

Cleaning

WARNING:
• Before cleaning, always remove the mains
plug and wait until the device has cooled
down.
• Do not immerse the device in water. Other-
wise this might result in an electric shock or
fire.
CAUTION:
• Do not use a wire brush or any abrasive
items.
• Do not use any acidic or abrasive detergents.
• Clean the casing with a slightly damp cloth with-
out detergents.

Group Head and Rubber Seal

Wipe group head and rubber seal with a damp
cloth. Use a soft nylon brush to remove stubborn
residues. Dry with a soft cloth.

Accessories

Wash filter holder, filter inserts, drip tray grid, drip
tray, measuring spoon, water tank, steam nozzle
pipe and steam nozzle cover in warm sudsy water.
Use a soft nylon brush, if necessary. Rinse with
clean water. Dry all parts with a soft cloth.
CAUTION:
These parts are not dishwasher-safe. Heat and
aggressive detergents can cause distortion and
decolouration.
Water Tank
• Open the lid to remove the water tank. Pull the
tank with both hands up and out. Replace the
tank after cleaning and drying.
NOTE:
The water tank has two hooks.
• Hook the water tank into the two eyelets of the
appliance.
• Press the water tank slightly down for the valve
to open.
62
Steam Nozzle
• Clean steam nozzle, attached pipe and cover
immediately after use. Dry milk residue is dif-
ficult to clean.
WARNING:
The steam nozzle is hot immediately after
use!
• Remove the cover. Use the small grip. Turn
slightly for easy removal. Use a damp cloth to
hold the steam nozzle with one hand!
• Use the spanner (20) to remove the small pipe
from the steam nozzle. See Fig. C on page 3.
Turn the spanner clockwise.
• Leave pipe and cover for some time in the
warm sudsy water. In this way milk residue is
easily removed.
• Wipe the steam nozzle on the appliance with a
damp cloth.
NOTE:
Fill a container with hot water to remove dry
residue. Place the container under the steam
nozzle, so that it is submerged.
• After cleaning replace pipe and cover on the
steam nozzle. Place a heat-resistant empty
container under the steam nozzle. Operate the
appliance as instructed under "Making Cappuc-
cino" points 5 and 6. After cleaning the steam
nozzle is again ready to use.

Decalcification

Scale deposits put the functionality of your ap-
pliance at risk. It is necessary to decalcify the
appliance regularly. The intervals depend on use
frequency and water hardness.
Decalcify with a commercial decalcifier for coffee
machines.
1. Dose as instructed on the packaging or on the
instruction leaflet.
2. Operate the appliance as instructed for making
espresso until the tank is empty. Let the solu-
tion flow through the group head (without filter
holder).