Periodic Maintenance; Every Week; Every Month; Every 200 Hours - AGM G50 Serie Manual De Instalación

5.2 PERIODIC MAINTENANCE

5.2.1 EVERY WEEK

• Weekly ispect the safety devices as indicated in the handbook.
• How to check the hydraulic oil level:
• Lower the saddies completely and check that the level corresponds to the indicator, 2 ÷ 3 cm below the hole (10 Fig. 12).
• If necessary fill up trough the plug (9 Fig. 12) with hydraulic oil "ESSO NUTO H32" or the equivalent.

5.2.2 EVERY MONTH

• Check that the lift screw set is tightly sealed
• Check the hydraulic seal; tighten loosened connectors where necessary.
• Check that the hydraulic hoses are in good state. Replace damaged parts with original components when necessary.
• Check that the pivots, rollers, bushings, saddle-arms frame and their extensions are duly lubricated and in good conditions; if necessary,
replace the damaged parts with original components.
5.2.3 EVERY 200 HOURS OF LIFT RUNNING
• Replace the oil in the hydraulic system, discharging the old one out of the pump and clean the oil filter. Refer to the respective spare parts
table enclosed in this manual for this operation.
A correct performance of these operations will totally come to the user's advantage. The equipment will indeed be in perfect state when work
is resumed.
5.3 EMERGENCY HYDRAULIC PUMP
By request it is possible to install an emergency hydraulic pump in case of electricity failures or (as described in paragraph 4.5 "Emergency lowering") to solve
problems caused by occasional blockages in the lowering system.
Please remember that AGM-COSMET Srl or its distributors are always available if assistance or spare parts are needed.
38