Ritter AES 52 S Instrucciones De Montaje página 20

• Grease the rotary blade's gear
wheel with a little Vaseline.
• Fit the rotary blade back into
the appliance.
Cleaning the drawer
• Remove the left-over holder (6)
and the slice carriage (5).
• Make sure that the slice thick-
ness adjustment knob (11a) is
set to position "0". Otherwise,
the multi slicer cannot be folded
down for safety reasons.
M
Use one hand to hold the
appliance at the stop plate (9)
and the other hand to press the
release button (10).
• Fold down the multi slicer.
Remove the multi slicer from the
drawer:
N
Push the slide bar lock (16a)
in the direction of the arrow.
O
Snap the lock clip (16)
upwards.
• Slide the multi slicer in the
direction of the arrow.
• Lift the multi slicer out of the
drawer.
• Clean the drawer according to
the manufacturer's specifications.
Replace the multi slicer in the
drawer:
U
Position the multi slicer over
the two clamping fixtures in the
drawer.
V
Slide the multi slicer towards
the front of the drawer until it
locks into place on the two clamp-
ing fixtures.
W X
/ Press down on the lock
clip until it snaps into place.
• Plug the cable back into the
socket.
MAINTENANCE
Your multi slicer is maintenance-
free. However, we recommend
that you occasionally apply a little
Vaseline to the rails for the slice
carriage to keep them lubricated
and ensure that the carriage
continues to move easily.
STORAGE
• Remove the left-over holder (6)
and the slice carriage (5).
• Fold down the finger protec-
tor (5a).
• Make sure that the slice thick-
ness adjustment knob (11a) is
set to position "0". Otherwise,
the multi slicer cannot be folded
down for safety reasons.
M
Use one hand to hold the
appliance at the stop plate (9)
and the other hand to press the
release button (10).
• Fold down the multi slicer.
P
Hold the multi slicer by the
lifting bar (4) and pull the release
lever (12). Lower the multi slicer
into the drawer.
If the drawer is sufficiently deep,
the slice tray (13) can be stored
on top of the appliance.
DISPOSAL
Once it has reached the
end of its service life, this
product must not be
disposed of as normal
domestic waste. It must be taken
to a dedicated collection point for
the recycling of electrical and
electronic devices. This is
indicated by the symbol on the
product, the operating instructions
or the packaging.
Its material components can be
re-used in accordance with their
identification. By contributing to
the reuse, recycling and other
forms of recovery of used appli-
ances, you can play a valuable
role in protecting our environ-
ment.
Please consult your local author-
ity's waste disposal office.
REACh DIRECTIVE
See www.ritterwerk.de
SPECIAL ACCESSORIES
A special, non-toothed rotary
blade is also available for use
with sliced meat, sausage and
ham.
SERVICE, REPAIRS AND
SPARE PARTS
Please contact your local after-
sales service for all service,
repairs and spare parts matters!
See www.ritterwerk.de
TECHNICAL DATA
This appliance complies with the
following regulations and direc-
tives:
– 2014/30/EU
– 2014/35/EU
– 1935/2004/EC
– ErP 2009/125/EC
– 2011/65/EU
The appliance thus complies with
the CE specifications.
Mains voltage/power consump-
tion: Refer to the type label on the
underside of the appliance.
Slice thickness:
0 mm to approx. 14 mm
WARRANTY
This ritter appliance comes with
a two-year manufacturer's war-
ranty, starting with the date of
purchase and in accordance with
the EU warranty directives. In
the event of a warranty claim or
for servicing, the appliance must
always be sent to the appropriate
national customer service centre.
English
13