Installation; Din Front/Rear Mount; Din Front-Mount - Pioneer DEH-2150UBG Manual De Instrucciones

Section

Installation

04
Important
! Check all connections and systems before
final installation.
! Do not use unauthorized parts. Use of un-
authorized parts may cause malfunctions.
! Consult your dealer if installation requires dril-
ling of holes or other modifications to the vehi-
cle.
! Do not install this unit where :
— it may interfere with operation of the vehi-
cle.
— it may cause injury to a passenger as a re-
sult of a sudden stop.
! The semiconductor laser will be damaged if it
overheats. Install this unit away from hot
places such as near the heater outlet.
! Optimum performance is obtained when the
unit is installed at an angle of less than 60°.
! When installing, to ensure proper heat disper-
sal when using this unit, make sure you leave
ample space behind the rear panel and wrap
any loose cables so they are not blocking the
vents.

DIN front/rear mount

This unit can be properly installed either from
"Front" (conventional DIN front-mount) or
"Rear" (DIN rear-mount installation, utilizing
threaded screw holes at the sides of unit chas-
sis). For details, refer to the following installa-
tion methods.

DIN Front-mount

Installation with the rubber bush
1 Insert the mounting sleeve into the
dashboard.
When installing in a shallow space, use a sup-
plied mounting sleeve. If there is enough
20
En
space behind the unit, use factory supplied
mounting sleeve.
2
screwdriver to bend the metal tabs (90°)
into place.
3
Dashboard
Removing the unit
60°
1
outwards to remove the trim ring. (When
reattaching the trim ring, point the side
with a groove downwards and attach it.)
2
both sides of the unit until they click into
place.
3
Black plate (20,1)
Secure the mounting sleeve by using a
Install the unit.
Mounting sleeve Screw
Extend top and bottom of the trim ring
Trim ring
! It becomes easy to remove the trim ring if
the front panel is released.
Insert the supplied extraction keys into
Pull the unit out of the dashboard.
YRD5220-B/S
<
Rubber bush
>20