Installation - Schneider Airsystems Air Master Serie Manual De Instrucciones

GB
DESCRIPTION OF THE MACHINE (fig.1)
The compressor is essentially made up of:
1) Command board
2) Electric appliance compartment
3) Suction chamber
4) Air outlet tap
5) Cooling fan
6) Air-oil radiator
7) Screw-motor plate / Belt-tightener
UNPACKING
The compressor must only be lifted using transpallets or forklift trucks with adequate capacity (see technical data
table).
• Check the perfect integrity of the package.
• Unpack the machine (paying attention to any instruction on the packaging itself).
• Check the perfect integrity (external) of the machine.
• Open the hatches and visually check the internal parts.
• Dispose of the packaging according to the laws in force regarding this subject.
It is however recommended to keep the packaging at least for the warranty period.
LIFTING AND MOVING THE MACHINE
Lift the machine using a fork lift truck. This operation must be carried out by inserting the forks inside the support feet.
Mount the anti-vibrating elements in the relevant housing and transport with care to the place chosen for positioning
POSITIONING (fig.2)
The pre-selected place for installation of the compressor must have the
following requisites as well as having the features requested by the Accident-
prevention Standards in force:
A) Low percentage of dust particles.
B) Adequate ventilation and dimensions that allow (with machine
running) to maintain the environmental temperature (5 °C ÷ 45 °C).
C) In the case of inadequate output of hot air, install the suction devices
as high as possible.
N.B.: The dimensions of the spaces are indicative.
The condensation is a polluting mixture and must be dispersed in the
environment or in the drain system. Prepare a collection container, which
must have a valve and a removable recipient or recipient connected to
water-oil seperator appliance.
appropriate EW18 cod.548200000 water-oil separator appliance.
Dispose of the oil and/or condensation according to laws in force
6 6 6 6 6

INSTALLATION

8) Electric motor
9) Screw compressor
10) Oil-separator tank
11) Minimum pressure valve
12) Oil-separator filter
13) Air filter/ Suction adjuster
14) Oil filter
15) Inverter
1
.
15
.
2