Safety Regulations - Schneider Airsystems Air Master Serie Manual De Instrucciones

GB
AGENERAL WARNINGS
• The rotary compressors are meant for continuous, heavy duty industrial use. They are particularly adapt for industries that
require a great consumption of air over expended periods of time.
• The compressor should be used only as indicated in the manual and kept in a known and easily accessible place, as it must
accompany the machine for the whole of its working life.
• An employee of the company where the compressor is to be installed must be appointed responsible for the compressor
itself. Controls, adjustments and maintenance interventions must be under his/her responsibility: whenever this person must be
replaced, the substitute must read the user and maintenance manual thoroughly along with any notes regarding technical and
maintenance interventions carried out up to that time
SYMBOLS USED IN THE MANUAL
Several symbols have been used inside this manual to highlight situations where maximum attention must be paid, practical
advice or simple information. These symbols can be found at the side of a text, at the side of a figure or at the head of a page (in
this case they refer to all of the subjects considered in that page).
Pay attention to the meanings of the symbols.
ATTENTION!
Highlights an important description regarding:
technical interventions, dangerous conditions,
warnings, prudential advice and/or very important
information.
MACHINE AT A STANDSTILL!
Every operation highlighted with this symbol must
only be carried out with the machine at a standstill.
SYMBOLS USED ON THE COMPRESSOR
Different labels are applied to the compressor, which highlight any hidden dangers and indicate correct behaviour during use of
the machine or in particular situations.
It is fundamental that they are respected.
.
Warning symbols
High temperature hazard
Risk of electric shock
Risk of hot or dangerous gases in the work area
Pressurised container
Moving mechanical parts
Maintenance interventions in progress
Machine with automatic start-up
4 4 4 4 4

SAFETY REGULATIONS

.
REMOVE VOLTAGE!
Before any interventions on the machine is it
compulsory to deactivate the machine's electric
power supply.
SPECIALISED STAFF!
Every intervention highlighted by this symbol
must only be carried out by specialised staff.
.
Prohibition symbols
Do not open the hatches with the machine
functioning
If necessary, always use the emergency stop
and not the line isolator switch
Do not use water to put out fires on electrical
appliances
Compulsory signals
Read the user instructions carefully