Product Identification - Schneider Airsystems Air Master Serie Manual De Instrucciones

ALWAYS:
Check that the network voltage corresponds to the voltage indicated on the CE label and that the electric connection has been
carried out with adequately-sectioned cables.
Always check the oil level before starting up the compressor.
Understand how to stop the compressor in the case of emergency and understand the use of all commands.
Before every maintenance operation remove the power supply in order to prevent accidental start-up.
After maintenance operations check that all components have been re-mounted correctly.
Keep children and animals away from the work area to prevent injury caused by any equipment connected to the compressor.
Ensure that the working environmental temperature is between +5 and + 45 ºC.
Install and use the compressor in an environment that is not potentially explosive and in the absence of free flames.
Leave at least 50 cm free between the compressor and the wall; so as not to obstruct the cooling air passage.
Use the emergency button positioned on the command board only when really necessary in order to prevent injury to persons.
The continual use of this device can damage the compressor.
If an intervention and/or enquiry is requested always specify the model and serial number stated on the CE label.
Follow the maintenance programme present in the manual
NEVER:
Touch internal components or pipes as they reach very high temperatures during functioning, remaining so even for a certain
period of time after shutdown.
Position inflammable objects, nylon or material near to and/or on the compressor.
Transport the compressor with a pressurised tank.
Use the compressor if the power supply cable is faulty or id the attachment is precarious.
Use the compressor in particularly humid or dusty environments.
Aim the jet of air towards persons or animals.
Allow inadequately trained persons to run the compressor.
Strike the fan with contusive objects as they could cause unexpected breakage during functioning.
Run the compressor without air filter.
Camper with safety and adjustment devices.
Run the compressor with the hatches/panels open or removed.

PRODUCT IDENTIFICATION

The product you have purchased is identified by the EC label, which contains the following data:
1) Manufacturer data
2) CE mark – year of manufacture
3) TYPE = compressor name
CODE = compressor code
SERIAL N. = the serial number of the compressor you have purchased (always state when requesting assistance)
4) air yielded by the compressor measured in (l/min) and (cfm)
5) maximum working pressure (bar and PSI) – compressor noise dB(A)
6) electric data: power supply voltage (V/ph), frequency(Hz), absorption (A) - power (HP and kW), revs per minute (Rpm).
7) any other type-approvements
SAFETY REGULATIONS
.
GB
5 5 5 5 5