Cadel CLOE Manual De Instalación página 95

Proceed as follows (see Fig. 59 page 96):
• Remove all panels.
• After these operations you can have access at the following components: geared motor (3), ignition
plug (5), ambient fan (8), fume fan (7), ambient probe (10), fume probe (9), thermostat (6), electronic
board (1), pressostat (4). For cleaning or replacemente of the auger it is necessary to unscrew the three
bolt of the geared motor (3) and to extract it, unscrew the two screws lying under the geared motor of
the auger, remove the hand rejector inside the hopper and then unscrew the inner bolt of the auger. To
assembly proceed at the contrary.
CLOE - SQUARE
Fig. 58 - Shutter with the fuse to remove
EN
95