Cadel CLOE Manual De Instalación página 71

Fig. 20 - Countersunk screw
• INside the panel there are 4 threaded (see Fig. 21 page 71) seats for screwing no.4 M5x10 countersunk
screws (see Fig. 20 page 71). Make sure the screws sufficiently project from the panel in order to insert
them in the relevant slots on the stove body.
Fig. 22 - Lower slots
• Insert and lay the screws in the relevant slots on the stove body (see Fig. 22 page 71).
• Slide the panel downwards in order for all 4 screws to firmly lay on their seats (see Fig. 23 page 71).
Fig. 24 - Side slots
• At this point assembly the side panels. Proceed as previous steps (see Fig. 24 page 71 and Fig. 25
page 71).
• Assembly upper panel at the end, the procedure depends on its material:
glass panel (follow A instructions),
•
metal or stove panel (follow B instructions).
•
CLOE - SQUARE
Fig. 21 - Threaded seat
Fig. 23 - Lower panel insert
Fig. 25 - Side panels insert
EN
71