harness should always be adjusted correctly to ensure a perfect fit.
The harness should not be used when it is loose and if the harness
should loosen during the ascent or descent, it should be readjusted to
a safe and correct position.
LIFE-THREATENING DANGER The length of the connecting
individual part must not be extended or shortened by adding or
taking away a connection element. Runners may only be used in
accordance with established conditions of use and for their intended
purpose. Safety systems, devices or protective equipment that have
been damaged or involved in a fall should be taken out of use
immediately and checked by an expert or by the manufacturer. The
runners are a component of personal safety equipment and may only
be used by one person. If a runner has been damaged in a fall or
suffered any other damage; if the shock absorber has been ripped out
or its protective cover is missing; if the (red) indicator on the carabiner
is visible or the visual and functional check under point 3 has not been
carried out or if there is any other doubt as to the safe usage of the
equipment, this should be checked thoroughly by an expert and
repaired by the manufacturer as required. The lifetime of the
equipment depends on the frequency of use and environmental
conditions. Provided that the visual and functional check (3) has been
carried out and no criteria for exclusion have been established, the
runners can be used without restriction. The shock absorber is subject
to ageing and must be replaced after a maximum of 6 years, when
stored correctly.
Fall-arrest device
CLAW CL-002
For information on compatibility with other systems, contact
SKYLOTEC! The certification relates exclusively to the fall-arrest
system. The anchoring of this system has not been taken into account.
3.) Visual and functional check before use
(for all functional checks, ensure the correct alignment of the runner.
Hold the runner so that the arrow on the back points upwards or in the
direction described in the functional check).
3.1) Check for damage, rips, deformations.
3.2) Open and close the blocking mechanism whilst activating the
release lever.
3.3) Open the runner by pulling on the release button and then
pushing the release lever upwards. The runner should then open
completely.
6
Safety system
ICM VERTICAL Fall Arrest System