Specifications - Stihl HSE 42 Manual De Instrucciones

English

Specifications

Motor
HSE 42
Voltage: 220 - 240 V
Rated current: 1.9 A
Frequency: 50 - 60 Hz
Power consumption: 420 W
Fuse: min. 10 A
Insulation: II, E
HSE 52
Voltage: 220 - 240 V
Rated current: 2.1 A
Frequency: 50 - 60 Hz
Power consumption: 460 W
Fuse: min. 10 A
Insulation: II, E
Cutting Blade
HSE 42
Sharpening angle: 36°
Tooth spacing: 21 mm
Stroke rate: 3,400/min
Cutting length: 450 mm
HSE 52
Sharpening angle: 32°
Tooth spacing: 23 mm
Stroke rate: 3,400/min
Cutting length: 500 mm
32
Weight
HSE 42: 3.0 kg
1)
HSE 42 : 3.6 kg
HSE 52: 3.1 kg
1)
HSE 52 : 3.7 kg
* Versions with 10
m appliance cord for UK
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L to DIN EN
p
60745-2-15
HSE 42: 84 dB(A)
HSE 52: 84 dB(A)
Sound power level L to DIN EN 60745-
w
2-15
HSE 42: 95 dB(A)
HSE 52: 95 dB(A)
Vibration measurement a
hv
60745-2-15
Handle, left Handle, right
2
HSE 42: 3.1 m/s 1.5 m/s
2
HSE 52: 3.1 m/s 1.5 m/s
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration level.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
to DIN EN
2
2
2
HSE 42, HSE 52