Introduction - AEMC Instruments 502 Manual De Instrucciones

• Read the user manual before operat-
• Only use the meter as specified in this
• Never use this meter on a circuit with
• Never measure current while the
• Do not operate the meter if the body
• Only use factory supplied leads.
• Check the rotary range switch and
• Do not perform resistance and conti-
• Use extreme caution when measur-
• Use extreme care when working
• Do not use the meter in over range/
Quality AEMC Products Online at:
• For accurate readings, change the
2
CHAPTER 1

INTRODUCTION

ing and follow all safety information.
user manual.
voltages greater than 600Vrms @
50/60Hz.
test leads are connected to the input
jacks.
or test leads look damaged.
make sure it is at the correct position
before each measurement.
nuity test on a live circuit.
ing live systems with voltages greater
than 60V
DC
around bus bars and bare conductors.
GlobalTestSupply
www.
overload conditions (OL).
battery when the
TRMS Clamp-on Meter Model 502
Warning
or 30V .
AC
symbol appears.
.com
[email protected]