Cleaning; Troubleshooting; Safety Notices - CASO DESIGN TouchVAC Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 80
Attention
► Dry all parts thoroughly before using after cleaning.
► Do not immerse the unit in water or other liquid.

17.2 Cleaning

Outside of the unit
Wipe with a damp cloth or sponge and mild dish soap.
Inside of the unit
Wipe away any food or liquids with a paper towel.
Sealing profile (which presses the bag against the sealing bar)
Remove the sealing profile and clean it in warm soapy water.
► The sealing profile should be cleaned thoroughly before installing it again.
► Be careful during re-installation, so that nothing will be damaged and sealing profile is
placed well so that the device can work properly.
Cleaning bags for reuse
Wash the bags in warm water with a mild dishwashing soap, then rinse them well
and allow them to dry completely before reusing
Attention
► Bags used to store raw meats, fish or greasy foods can't be reused.

18 Troubleshooting

The following table may help you narrow down and address minor malfunctions:

18.1 Safety notices

Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
Please note
.
40
Tabla de contenido

Solución de problemas

loading

Tabla de contenido