Wheels; Registrations; Transmission Clutch Registration; Pto Clutch Adjustment - GOLDONI STAR Serie Uso Y Mantenimiento

6.7 WHEELS

Front
Tyres
10.0/75x15.3"
240/70R16"
250/80R18"
260/70R16"
280/60x15.3"
280/70R16"
280/70R18"
29-12.50x15"
8.25x16"
9.0/75x16"

6.8 REGISTRATIONS

6.8.1 Transmission clutch registration

Clutch pedal take up should be about 35/40 mm. When this distance is less, the
clutch should be registered by slackening off nut n.1 fig.25.

6.8.2 PTO clutch adjustment

When lever travel diminishes, adjust the clutch by shortening rod N° 1 fig.27.
Idle travel length must be about 25/30 mm.

6.8.3 Registering the main and parking brakes

When one of the rear wheels displays different braking conditions than the other
or when there is too much free travel in the brake pedals, register the brakes by
loosening nut n.1 fig.26 and adjust with link rod n.2 until the required adjustment
has been made. Tighten home nut n.1.
When the parking brake lever does not hold the tractor sufficiently, reduce free
travel by screwing in nut n.3 fig.26.
WARNING (only for Max model): If warning light n.13fig.2 comes
on or flashes, this means that the brake system is defective and
braking performance is compromised. We recommend contacting
your closest Authorised Technical Assistance Centre.
TYRE INFLATION PRESSURE
Bar Kpa
2,5 250
2 200
2,5 250
2 200
2,2 220
2 200
2 200
2 200
2,3 230
2,1 210
93
Rear
Tyres
12.4R24"
13.6Rx24"
14.9Rx24"
280/85R28"
320/70R24"
320/85R28"
340/85R24"
360/70R24"
360/70R28"
375/75x20"
380/70R20"
380/70R24"
380/85R24"
420/70R24"
44x18.00-20"
Bar KPa
1,6 160
1,6 160
1,6 160
2 200
2 200
2 200
2 200
1,6 160
2 200
2 200
2 200
1,6 160
2 200
1,6 160
1,7 170