Connections; Preparing The Remote Control; Installing Batteries; Remote Control Operation Range - Yamaha CDR-HD1500 Manual De Instrucciones

Connecting a monitor
You can display the list of groups or tracks to be played, copying/recording settings or the list of setting items on the monitor by connecting
the monitor to this unit. Connect the S VIDEO jack or the VIDEO jack whichever available on your monitor.
Connecting the power cable
[U.S.A. model]
Plug the power cable into the AC inlet when all connections are complete, and then plug in the power cable to the wall outlet.
[Europe, U.K. and Australia models]
Plug in this unit to the wall outlet when all connections are complete.

Installing batteries

1.
Press the hook (h) of the battery cover to remove it.
2.
Insert 2 batteries (AA, UM-3 or R6 type) according to
the polarity markings on the inside of the battery
compartment.
3.
Close the cover until it snaps into place.
Battery replacement
If you find that the remote control must be used closer to this unit
than usual, the batteries are weak. Replace both batteries with new
ones.
Notes on batteries
• Use only AA, UM-3, or R6 type batteries for replacement.
• Do not mix a new battery with a used one.
• A rechargeable battery cannot be used.
• Do not mix different types of battery.
• Do not attempt to short out the batteries by directly connecting the
plus (+) and the minus (–) with a piece of metal.
• Remove the batteries if the remote control will not be used for an
extended period of time.
• If the batteries leak, dispose of them immediately, taking care not
to touch the battery fluid. If the battery fluid comes into contact
with your eyes, mouth, or skin, rinse it off with water immediately,
and consult a doctor. Clean the battery compartment thoroughly
before installing new batteries.

PREPARING THE REMOTE CONTROL

Remote control operation range

NATURAL SOUND HDD/CD RECORDER
POWER
HDD CDR COPY
PHONES LEVEL
A.M.Q.R.
MIN MAX
Remote control sensor
Notes
• If operation of this unit by the remote control creates any
malfunction in any other components, change the placement of
the component.
• Do not spill any liquid on or drop the remote control. Do not
place it near a heater or in the bathroom where the temperature
and humidity become high.
• Make sure the remote control sensor is not exposed to direct
sunlight or strong lights. If it is, it may not function correctly.

CONNECTIONS

MULTI JOG
PUSH ENTER
TEXT/TIME MODE MENU
TRACK NO. COMPLETE CLEAR
BOOKMARK
DIGITAL REC LEVEL
INPUT ANALOG REC LEVEL
REC FINALIZE ERASE
OPTICAL
COAXIAL
ANALOG
MIN MAX
Within 6m (20')
11
1