Starting The Myo Plus App For The First Time - Ottobock 757M20 Serie Instrucciones De Uso

• Apple iPhone 5, iPhone 6 Plus, iPhone 6s, iPhone 7, iPhone 8 Plus, iPhone X, iPod
Touch Generation 5, iPod Touch Generation 6
• Samsung Galaxy S5, Galaxy S7 Edge, Galaxy S8, Galaxy Note 3, Galaxy A3 (2016),
Galaxy A3 (2017), Galaxy Tab A, Galaxy Tab S
• Sony Xperia Z, Xperia Z1
• Xiaomi Mi A1, Redmi Note 3
• Acer Iconia One
• Amazon Fire 10
• Blackberry Keyone
• Google Nexus 6, Pixel
• Huawei P9 Lite, P10
• LG Optimus G4, Optimus V30
• Motorola Moto X, Moto G3, Moto G5 Plus
• One Plus 5T
8.2 Initial connection between MyoPlus app and product
The following points should be observed before the initial connection:
• Bluetooth on the mobile device must be switched on.
• The Bluetooth ID and Bluetooth PIN of the product being connected must be known.
The Bluetooth PIN and Bluetooth ID are found on the enclosed Bluetooth PIN card.
The Bluetooth ID is found on the Myo Plus TR (see fig. 1, item 6) and starts with the letters
"BT ID".

8.3 Starting the Myo Plus app for the first time

INFORMATION
Keep mobile app up to date.
INFORMATION
If you suspect that there may be a cyber security issue, please contact the manufacturer.
INFORMATION
Bluetooth on the prosthesis must be turned on in order to use the MyoPlus app.
After turning on Bluetooth, it remains active for approx. 5 minutes. The app must be started and
the connection established during this time.
1) Tap the symbol of the Myo Plus app
→ The end user licence agreement (EULA) is displayed.
2) If rights are requested the first time the app is started, these have to be granted. Otherwise
the app cannot be started.
3) Accept the end user licence agreement (EULA). If the end user licence agreement (EULA) is
not accepted, the Myo Plus app cannot be used.
4) The "Bluetooth connection" menu item is opened.
5) Tap to establish a connection.
6) Select the desired component from the list.
7) Enter the Bluetooth PIN code and tap "Connect".
→ The symbol is displayed when the connection has been established.
→ Once the connection has been established, the data are read from the component. Then the
radar chart is displayed.
22
.