Changing Display Settings (Display Menu); Adjusting The Display Viewing Angle (Angle Adj); Changing The Day/Night Brightness (Dim Day/Dim Night) - Blaupunkt Hamburg MP57 Instrucciones De Manejo E Instalación

Changing display settings
(DISPLAY MENU)
In the Display menu, you can change the
following display settings:
•
Day/night brightness
(DAY/NIGHT DIMMER LEVEL)
•
Adjusting the display viewing angle
(ANGLE ADJ)
DISPLAY MENU
CD·C
USER MENU
mp3
To call up the Display menu:
Press the MENU/OK button
u
Press the rocker switch
u
peatedly until "DISPLAY MENU" appears
on the display.
The display menu appears.
Press the rocker switch
u
the menu.
Adjusting the display viewing angle
(ANGLE ADJ )
The angle from which the driver looks at
the display is dependent upon, among oth-
er things, the installation position of the de-
vice, the seating position, and the physical
size of the driver. You can adjust the display
to suit your viewing angle by changing the
contrast as follows.
In the Display menu, press the rocker
u
=
switch until "ANGLE ADJ" is dis-
played.
Press the rocker switch
u
the setting.
u
Changing the day/night brightness
(DIM DAY/DIM NIGHT )
The device automatically switching to night
mode if you turn on the light of your vehicle.
A prerequisite is that the device is connect-
MIX
ed with your vehicle via a corresponding
ROCK
POP
CLAS
connection as described in the installation
RPT
instructions.
You can adjust the display brightness sepa-
<
.
rately for day and night.
=
or re-
u
:
to open
u
To change the display brightness:
u
:
to call up
Press the rocker switch
change the display contrast.
You can adjust the display contrast in 13
increments from –6 to +6.
In the Display menu, change between
the menu items with the rocker switch
=
or .
•
"DIM NIGHT" (night brightness)
•
"DIM DAY" (day brightness)
Press the rocker switch
the setting.
Use the rocker switch
lect a brightness level between 1 and 16.
User settings
=
or to
:
to call up
=
or to se-
49