Accessories; Technical Data; Safety Instructions; Cut-Off Machine Safety Warnings - Hilti DC-EX 230/9 Manual De Instrucciones

3 Accessories

Designation
Vacuum cleaner from the Hilti range

4 Technical data

Right of technical changes reserved.
Weight
Dimensions
Disc diameter
Maximum cutting depth
Connector
Cutting position mark
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise information (as perEN 60745‑1):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level
Vibration information in accordance with EN 60745‑1
Triaxial vibration values (vibration vector sum)
Surface grinding with the hoop handle, a
Uncertainty (K)

5 Safety instructions

The DC‑EX 230/9" cutting guard is for use exclusively
with the DAG 230‑D, DCG 230‑D and DCG 230‑DB
angle grinders.
Before using the cutting guard in conjunction with
the angle grinders mentioned above, read the operat-
ing instructions for the applicable angle grinder and
observe all instructions.

5.1 General safety precautions

Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury. Save all warnings and
instructions for future reference. The term "power tool"
1.93 kg (lbs)
330 mm X 90 mm X 220 mm (13in x 3.5in x 8.7in)
230 mm (9")
60 mm (2.36in)
For Hilti and other standard vacuum cleaners
Indicates the position of the disc inside the guard
112 dB (A)
101 dB (A)
3 dB (A)
measured in accordance with EN 60745‑2‑3
6.0 m/s²
h,AG
1.5 m/s²
in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
5.2 Safety instructions for abrasive cutting-off
operations

5.2.1 Cut-off machine safety warnings

a) Read all safety warnings, instructions, illustra-
tions and specifications provided with this power
tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
b) Always use guard provided with the tool. The
guard must be securely attached to the power
en
11