SRAM RockShox Suspension Fork Manual Del Usaurio página 7

Suspension Fork User Manual
seCUre - maxle DH
Use a 6 mm hex wrench to turn the non-drive side axle bolt clockwise until 8 clicks are heard or felt or a
torque value of 3.4 N·m (30 in-lb) is achieved.
After closing the Maxle quick release lever, do not reposition or spin the lever. Repositioning
or spinning the Maxle lever can cause the axle to come loose, compromising the security of
the axle which can lead to serious injury and/or death.
remoVaL - maxle Lite
1. Open the Maxle quick release lever and position it in the slot on the axle flange.
2. Turn the quick release lever counter-clockwise until the axle is disengaged from the threads on the fork
dropout then slide the axle out of the hub.
remoVaL - maxle DH
1. Use a 6 mm hex wrench to turn the
or felt.
2. Use a 6 mm hex wrench to turn the
fork leg, then remove the Maxle DH.
MainTenance
To maintain the high performance, safety, and long life of your front suspension, it is required that you
periodically check the fastener torque values for compliance as well as perform routine maintenance
on your fork. If you ride in extreme conditions, torque compliance checks and maintenance should be
performed more frequently.
Before disassembly or service of any air system remove the air pressure from all air
chambers and remove the air valve core from the bottom of the fork. For complete service
instructions, visit www.rockshox.com or www.sram.com.
We recommend any service be performed by a qualified bicycle mechanic. To obtain service
information or instructions, visit our website at www.sram.com ,www.rockshox.com, or contact your
local RockShox dealer or distributor.
Copyright © SRAM, LLC • 2010
w a r n i n g
non-drive side axle bolt counter-clockwise until no clicks are heard
drive side axle bolt counter-clockwise until the axle is free from the
w a r n i n g
English
7