Stopping The Wash Cycle And End Of Wash Cycle; Drainage Of The Machine; Switching Off The Machine - ASBER TECH-500 Serie Manual De Instrucciones

asberprofessional.com

14.1.5 Stopping the wash cycle and end of wash cycle.

The wash cycle can be stopped in the following ways:
•
•
At the end of the wash cycle, remove the basket and leave the dishes to dry naturally. Remove the
dishes from the basket with clean hands, taking care not to burn yourself as the dishes are extremely
hot.

14.1.6 Drainage of the machine

ASBER dishwashers have two types of drainage; gravity drainage or using a drainage pump, which is
optional. The drainage pipe must always be fitted on a siphon to prevent the return of odours.
14.1.6.1 Drainage by gravity.
To drain the machine in this way, just remove the overflow from the machine and it will drain naturally.
For reasons of safety, this method of drainage should only be used with the machine switched off.
14.1.6.2 Drainage using the drainage pump (optional).
The drainage using the drainage pump option is only available on request. To drain the machine using
this method, proceed as follows:
•
•
•
•
•

14.1.7 Switching off the machine

The dishwasher is switched off by pressing the ON-OFF button for 1.5 s. The machine should not be
switched off during the wash process as this will stop the tableware inside the machine from being
cleaned properly.
46
asberprofessional.com
By switching off the machine (pressing ON-OFF for 1.5 s)→the cycle stops completely.
By opening the door → when the door is closed the cycle continues.
Remove the overflow valve.
Leave the door open.
Press the drain button for 3 seconds.
Select drainage (short cycle button) → press 3 seconds
The drainage cycle will start automatically.
At the end of the cycle (approx. 160 s), the machine can be switched off.
To drain the machine with the drainage pump, the hose must be at a
Figure 10 Switching off the machine
height (max. 800 mm).
ENGLISH