Electric Hood Connection; Oven Positioning; First Starting - OEM START Manual De Uso Y Mantenimiento

3.2.b - Electric hood connection
Concerning electric hood connection, follow the instruc-
tions supplied with the hood.
3.2.c - Unipotential connection (Fig. 3)
The equipment shall be inserted in a unipotential system,
whose effectiveness shall be verified according to the
rules being in force.
A cascade connection shall be carried out among the
various oven components by using the screw (1) placed
on the rear oven side.
3.3 - OVEN POSITIONING (Fig. 4)
DANGER
The oven shall not be installed closed to
inflammable walls such as furniture, parti-
tion walls, matchboarded coatings etc... A
safety range of at least 20 cms from lateral
and rear oven sides should be kept. No in-
flammable flooring shall be utilized to install
the oven on it.
• The oven shall be positioned on the final area follow-
ing the indications reported in figure 7, because they
indicate the minimum distances required to allow the
oven correctly to function.
• Fix the oven position by braking the rear wheels.

3.4 - FIRST STARTING

DANGER
Once the oven is installed and before start-
ing it, carefully clean its inner part as well
as refractory surface as explained in "Main-
tenance" chapter, also make sure neither
foreign nor inflammable bodies are inside
the oven.
• Turn on the oven as indicated in "Functioning" para-
graph and set the temperature of both crown plate and
bedplate at 300°C, making sure the set temperature
is reached as well as the different options depending
upon the concerned model are functioning.
EN - 12
START
Installation and connections
FIG. 3
FIG. 4