Scope Of Delivery; Functional Description - Abicor Binzel FEC W3 Manual De Instrucciones

FEC W3

4 Scope of delivery

• Fume extraction system with mains connection of 115/230 V
• Rubber connector
Tab. 5 Scope of delivery
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current product catalogue.
Contact details for advice and orders can be found online at www.binzel-abicor.com.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk of transport
damage.
Goods inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging material. If you have
Tab. 6 Transport
4.2 Storage
For ambient conditions for storage in a closed environment, see:
 Tab. 3 Ambient conditions for transport and storage on page EN-7

5 Functional description

The FEC W3 extraction system is a mobile filter device for extracting and separating welding fumes in a work area. It is a
welding system component corresponding to welding fume separation class W3 (in accordance with ISO 15012-1).
It is designed for the separation of fumes generated during welding or thermal cutting of steels with alloy constituents such
as nickel or chrome ≤30%, and high-quality steels.
It is made primarily of plastic and has a modular design with a hinged filter housing with cleaning device, and suction, bypass
and emptying nozzle, as well as a mobile frame with integrated control, an extraction system and an air outlet.
The dirty air flows through an air intake fitting that is attached to the side and tangentially into the filter unit, which also
protects the filter from possible damage due to sparks.
The welding fume particles are separated by the cyclone effect and an ancillary filter cartridge. The cleaned air then flows
downward into an exhaust fan and from there back into the work area through an exhaust opening on the back side.
The air volume flow is monitored using differential pressure measurement.
DANGER
Risk of fire
Before installing and operating the extraction system, please observe the following:
• The extraction of welding fumes while welding oil-wetted parts is prohibited.
• The system must not be installed or used in areas that are subject to dust or gas explosion hazards.
• Before putting the system into operation, check whether the operating voltage specified on the nameplate corresponds
to the mains voltage.
BAL.0675.0 • 2019-09-16
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last carrier immediately.
Retain the packaging for potential inspection by the carrier.
questions concerning packaging and safety during shipment, please consult your supplier,
forwarding agent or carrier.
4 Scope of delivery
• Extraction hose (l = 5.00 m)
• Dust collecting bag (5 pieces)
EN - 9