Service And Repairs - Hitachi NT 65GS Instrucciones Y Manual De Seguridad

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

English
When not in use for an extended period,
apply a thin coat of the lubricant to the
steel parts to avoid rust.
Do not store the Nailer, fuel cell and
battery in a cold weather environment.
Keep them in a warm area.
When not in use, the Nailer, fuel cell and
battery should be stored in a warm and
dry place.
Keep it out of reach of children.
3. WARNING LABEL
Change the WARNING LABEL if missing
or damaged.
A new WARNING LABEL is available from
a Hitachi authorized service center.
4. Maintenance chart (See page 33)
5. Operator troubleshooting (See pages
33 – 34)
6. Service parts list
CAUTION
Repair, modification and inspection of
Hitachi Power Tools must be carried out
by a Hitachi Authorized Service Center.
This Parts List will be helpful if
presented with the tool to the Hitachi
Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of
power tools, the safety regulations and
standards prescribed in each country
must be observed.
MODIFICATIONS:
Hitachi Power Tools are constantly being
improved and modified to incorporate the
latest technological advancements.
Accordingly, some parts may be changed
without prior notice.
32
<Battery charger>
1. Check the Screws
2. Check for Dust
3. Fuse replacement of cigarette lighter
Warning label
4. Storage

SERVICE AND REPAIRS

All quality Nailers will eventually require
servicing or replacement of parts because
of wear from normal use.
NOTE:
Loose screws are dangerous. Regularly
inspect them and make sure they are
tight.
CAUTION
Using this battery charger with
loosened screws is extremely
dangerous.
Dust may be removed with a soft cloth
or a cloth dampened with soapy water.
Do not use bleach, chlorine, gasoline or
thinner, for they may damage the
plastics.
connecting plug
CAUTION
For continued protection against risk
of fire, replace only with same type
and ratings of fuse in cigarette lighter
connecting plug.
250V, 6A, DC
Storing in a place below 104°F (40°C) and
out of the reach of children.
WARNING
Only service personnel trained by
Hitachi, distributor or employer shall
repair the Nailer.
Use
only
parts
recommended by Hitachi for repair.
Specifications are subject to change
without any obligation on the part of
HITACHI.
supplied
or
Tabla de contenido
loading

Este manual también es adecuado para:

Nt 65gaNt 65gbNt 50gs

Tabla de contenido