Service Information; Protecting The Environment - Stanley STSC1718 Manual De Instrucciones

Warning! The use of any accessory not recommended
for use with this tool could be hazardous. Use only 185mm
blades with 19mm or 20mm diameter arbor.
Exception: 175mm abrasive blades can be used. When
cutting metal, be careful of hot sparks which are thrown by
the blade.
MAINTENANCE
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! Before performing any maintenance, switch
off and unplug the tool.
f Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
f Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based
cleaner.
Important! To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment (other
than those listed in this manual) should be performed
by authorized service centers or other qualified service
personnel, always using identical replacement parts.
LUBRICATION
Stanley tools are properly lubricated at the factory and are
ready for use.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SERVICE INFORMATION

STANELY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power tool service. For more information
about our authorized service centers and if you need technical
advice, repair, or genuine factory replacement parts, contact the
STANLEY location nearest you.
SPECIFICATIONS
Voltage
AR
B2C
B3
B2
BR
Power
No-Load Speed
ENGLISH • 23
STSC1718
220V ~ 50Hz
220V ~ 50Hz
120V ~ 50/60Hz
220V ~ 60Hz
127V ~ 60Hz
1700W
5500/min (rpm)