Service Information - Stanley STCT1860 Manual De Instrucciones

♦ When cutting thin sheet metal, clamp a piece of scrap wood
to the back surface of the workpiece and cut through this
sandwich.
♦ Spread a film of oil along the intended line of cut.
WARNING! Do not use this tool to mix or pump easily
combustible or explosive fluids (benzine, alcohol, etc.). Do not mix or stir inflammable liquids labelled
accordingly.
MAINTENANCE
Your Stanley corded/cordless appliance/tool has been
designed to operate over a long period of time with a minimum
of maintenance. To ensure satisfactory operations, the tool
must be maintained and cleaned regularly
WARNING: To reduce the risk of injury, turn unit off
and disconnect machine from power source before
installing and removing accessories, before adjusting or
changing set-ups or when making repairs. Be sure the
trigger switch is in the OFF position. An accidental start-up can
cause injury.
♦ This machine is not user-serviceable. If problems occur
contact an authorised repair agent.
♦ The tool will automatically switch off when the carbon
brushes are worn.
WARNING! Before performing any maintenance on
corded/ cordless power tools:
♦ Switch off and unplug the appliance/tool.
♦ Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
♦ Or run the battery down completely if it is integral and then
switch off.
♦ Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
♦ Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
♦ Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
♦ Regularly open the chuck and tap it to remove any dust
from the interior (when fitted).
Lubrication
Your power tool requires no additional lubrication.
Accessories and attachments used must be regularly
lubrication around the SDS Plus fitment.
Cleaning
WARNING! Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust mask
when performing this procedure.
WARNING! Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the material of the
parts. Use only mild soap and damp cloth to clean the
tool. Never let any liquid get inside the tool,cleaning of
gasoline or other chemicals, never immerse any part
of the tool into liquid.
Optional Accessories
WARNING! Since accessories, other than those offered
by Stanley, have not been tested with this product, use
of such accessories with this tool could be hazardous. To
reduce the risk of injury, only Stanley, recommended
accessories should be used with this product.
Protecting The Environment
Separate collection. This product must not be disposed
of with normal household waste.
Should you find one day that your Stanley product needs
replacement, or if it is of no further use to you, do not dispose of
it with household waste. Please sort it out for separate recycling.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-use
of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
DEUTSCH
Some local governments may require the local or municipal
waste disposal centers or retailers of new products to provide
households with electronic product recycling services.
Notes
Stanley's policy is one of continuous improvement to our
products and as such, we reserve the right to change product
specifications without prior notice.
Standard equipment and accessories may vary by country.
Product specifications may differ by country.
Complete product range may not be available in all countries.
Contact your local Stanley dealers for range availability.

SERVICE INFORMATION

Stanley offers a full network of company-owned and authorized
service locations. All Stanley Service Centers are staffed with
trained personnel to provide customers with efficient and
reliable power tool service. For more information about our
authorized service centers and if you need technical advice,
repair, or genuine factory replacement parts, contact the Stanley
location nearest you.
ENGLISH
21