Power-Saving Function; Magnetron Control Protection Function; Acoustic Signal Function; Cleaning And Care - Bifinett KH 1106 Instrucciones De Uso

IB_KH1106_E23715_GB

Power-saving function

You can activate the power-saving function if you
do not wish to use the microwave.
Activating the power-saving function
In standby mode, press button
seconds. The LED display goes out and the power-
saving function is activated.
Deactivating the power-saving function
As long as any button is pressed, the microwave
is in standby mode and the clock is displayed.
Note: The clock continues to run despite
the power-saving function.

Magnetron control protection function

If the microwave function has been in operation for
30 minutes or longer at a power level of 800 W,
the power level of the microwave is automatically
reduced to 700 W. This takes place when the
memory function is actiavted and also in an other
status.

Acoustic signal function

After completion of the cooking process a long
acoustic signal sounds five times.
Note:
– If you have pressed a button and activated a
valid function, a long acoustic signal sounds.
If, however, you have selected an invalid but-
ton/function, no acoustic signal sounds.
– If after setting cooking mode for 5 minutes
you have not pressed the button „Start/quick
start", the appliance returns to stand-by
mode (time is displayed).
15.07.2008 14:19 Uhr
„clock" for three
d
Seite 80

Cleaning and Care

Before cleaning, switch the microwave off and pull
the power plug out of the wall socket.
• Always keep the interior of the microwave
clean.
• If splash of food or spilt liquids stick to the
walls of the microwave, wipe them off with
a damp cloth.
• Use a mild detergent if the micro-wave
is more heavily soiled.
• Avoid using cleaning sprays and other
aggressive cleaning agents, as they can cause
stains, stripes or a blurring of the door surface.
• Clean the external walls with a damp cloth.
• To avoid damage to the functional components
in the interior of the microwave, do not let any
water seep in through the ventilation slits.
• Regularly remove splashing or contamination.
Clean the door, both sides of the window, door
seals and adjacent components with a damp
cloth. Do not use abrasive cleaning agents.
• If steam should collect on the outside of the
appliance door, wipe it off with a soft cloth.
This can happen if the microwave is operated
in extremely humid conditions.
• Regularly clean the glass turntable.
Rinse the plate in warm soapy water or
in the dishwasher.
• Clean the turnable ring and the appliance
door regularly to prevent excessive noise gene-
ration. Simply wipe the bottom of the microwa-
ve with a mild detergent. You can also wash
the turnable ring in mild soapy water or in the
dishwasher. Make sure after removing the tur-
nable ring for cleaning, that you re-install it cor-
rectly.
- 80 -