Description Of Functions; Setting The Clock; Setting 12-Hour-Mode; Setting 24-Hour-Mode - Bifinett KH 1106 Instrucciones De Uso

IB_KH1106_E23715_GB

Description of functions

Setting the clock

After inserting the mains plug into the socket and
powering on, open the microwave door once. The
LED display reads „0:00". The oven emits an
acoustic signal and goes into standby mode.

Setting 12-hour-mode

1. Press button d „Clock" once. A red clock
symbol appears on the LED display
and 12-hour-mode is indicated via „12 H".
2. Turn the dial a to set the hours.
3. Now press the button
display changes over to the minutes setting.
4. Turn the dial to set the minutes.
a
5. To finish press the button
following display flashes in the LED display „:"
indicating that the „Set clock" process has
been successfully completed.

Setting 24-hour-mode

1. Press button d „Clock" twice. A red clock
symbol appears on the LED display
and 24-hour-mode is indicated via „24 H".
2. Turn the dial to set the hours.
a
3. Now press the button
and the display changes over to the minutes
setting.
4. Turn the dial a to set the minutes.
5. To finish press the button
save". The following display flashes in the
LED display „:" indicating that the „Set clock"
process has been successfully completed.
Note: If you press the button „Cancel/Stop"
the appliance automatically changes back to
its previous status.
15.07.2008 14:19 Uhr
d „Clock" and the
d „Clock". The
d „Clock"
„Clock/energy
d
i
Seite 73

Setting the kitchen timer

The microwave has a kitchen timer, which you can
use independently with microwave operation.
1. Press button u „Kitchen timer" if the appliance
is in standby mode. The LED display shows a
flashing „0:00" and the red clock symbol
lights up.
2. Now set the desired time by using the dial
You can select any time range from 5 seconds
to 95 minutes.
3. Press button „Start/quick start". An acoustic
s
signal is issued and the read clock symbol
flashes. The count down begins.
As soon as the set time is expired, you will hear a
repeated acoustic signal. Press the button „Can-
cel/Stop" to stop the acoustic signal.
i
Note: While the Kitchen timer is running, the
current time cannot be displayed.

Operation

Door safety latch 6
Pull the handle to open the door. If the door is
opened during operation, the cooking process is in-
terrupted, the program or function, however, remain.
The cooking process is continued when the door is
closed and the button Start/quick start
again.
Glass turntable 2
Place the turnable ring
microwave. Position the turntable
indentations on thje back of the turntable lock into
, the three base clips. Always leave the glass turnta-
ble with the turnable ring
operation. Due to the rotating turntable an even
distribution of energy and microwaves is
guaranteed.
- 73 -
a .
s is pressed
3 in the middle of the
2 sich that the
3 in the appliance during