5.6 | EMPTYING THE GRASS CATCHER
The full level of the grass catcher is signalled by the full grass catcher flap. It is possible to regulated the full level of
the grass catcher by moving the sliding part of the flap (extending or shortening the arm).
(1) Sliding part extended = grass catcher filled to minimum
5.6a
(2) Sliding part retracted = grass catcher filled to maximum
Procedure for emptying:
} Drive the machine to the location where you wish to empty the grass catcher. Stop the machine and apply the brake. If on
a slope, use the parking brake.
} Deactivate the mowing deck by pushing down the activation switch.
} If the AUT/MAN switch is installed on the machine, leave this switch in position "AUT".
} Set the throttle lever to position "MIN".
} Slide the grass catcher dump lever handle completely upwards (1) and tilt it down (2) to tip out the grass catcher,
allow it to empty freely, slowly release it and tilt it back.
48
5.6b