(12) BRAKE PEDAL AND PARKING BRAKE INDICATOR LIGHT
The indicator light serves to signal correct and incorrect starting of the engine (
parking brake.
(
( ) )
P
(13) DIFFERENTIAL LOCK PEDAL
The pedal is used only if necessary and only when driving directly forward.
Never use the differential lock when changing travel direction. Otherwise there is a risk of serious damage to the
transmission!
(14) BRAKE PEDAL
(15) MULCHING FLAP LEVER
The lever has two functions:
1)
Mulching
– grass clippings are spread out under the lawnmower
2) Grass collection
– grass clippings are collected in the grass catcher
Prior to shifting the lever from the grass collection position to the mulching position (down), first stop the machine and allow the
mowing deck to run approximately 20 seconds without the mowing function so that remaining glass clippings are blown out the
ejection chute. Only then shift the lever to the mulching position and start travelling forward. Not adhering to this procedure may
cause the incorrect function of the flap and the clogging of the ejection chute.
} SETTING THE MULCHING LEVER
(1) Default state
(2) Slide the lever upwards
(3) Turn it left (anticlockwise). The telescopic draw bar will be locked in place.
(4) Push the lever downwards
4.1c
(5) Turn it right (clockwise)
(6) The lever will slide down to the correct position on its own
} SETTING THE GRASS COLLECTION LEVER
(1) Default state
(2) Slide the lever upwards. The flap will be locked in the position for collection of clippings in the grass catcher.
(3) Turn it right (clockwise)
4.1d
(4) The lever will slide down to a position not interfering with work on its own
To ensure the correct function of the mulching flap, it is necessary to thoroughly clean out grass clippings and dirt from
the mowing deck and the ejection chute at the end of the mowing session.
( )
P
Parking brake engaged signal
( )
Brake pedal applied signal
When the pedal is pushed down the lock is engaged.
When the pedal is released the lock is automatically disengaged.
Stepping on the brake pedal will slow down the riding mower.
The pedal is also used when starting the machine – it is only possible to start up with the
brake pedal applied.
5.2), pushed down brake and engagement of the
41