Master (Software Fader); Show Day Scheduler; Manually Starting A Show - Syncronorm VNANO 512 Instrucciones De Uso

21

Master (Software fader)

Use the four arrow keys
functions provide direct access to the 6 submasters, including the grandmaster. You can set the level
for each master directly and make several settings for each master. These settings include maximum
values of 100 % to minimum values of 0 % By means of the DEPENCE software, all faders can be
connected to component control channels. For instance, this makes it possible to dim the brightness of
the LEDs by means of one of the masters.
Up to three Windmasters can be configured. Each Windmaster's curve can be changed by means of
three interpolation support points on its linear characteristic curve. The speed for fading-up and
fading-down can be configured separately. (Ramp Up, Ramp Down). Furthermore, a waiting time can
be set as idle time before fading-up the Windmaster. (Waitig Time Up).
22

Show day scheduler

Use the four arrow buttons
1. Scheduler The show day scheduler, week scheduler and year scheduler can only be changed by
means of the DEPENCE software. The show day scheduler is always activated with each restart. To
deactivate it, use the system menu
23

Manually starting a show

Use the four arrow buttons
. Once the show scheduler has been disabled (see item 16 Show day scheduler) a show can be
started manually by accessing
DEPENCE software from the SD card.. Use
to get from the main level to the sub-menu item
to get from the main level to the sub menu item
Enable Scheduler Off
to get from the main level
Run Show and selecting a showfile .wds
Stop Show
7.Master
(Disabled).
2.Show to the sub menu item
created by means of the
to stop the show again.
- GB -
. The master
Run Show
49