Digital Inputs - Syncronorm VNANO 512 Instrucciones De Uso

- GB -
12

Digital inputs

The unit is equipped with eight configurable, galvanically isolated inputs for connection with third-
party systems or sensors.
The input voltage range for the digital inputs is between min. -5V and 30V DC
(Low=-5V..5V, High= 11V..30V).
In addition that the digital input terminal (GND) must be activated (see figure).
Alternatively, the digital input 1 can be used to connect an anemometer.
Wind speed measuring is useful for controlling the height of outdoor fountains used outside in relation
to the wind speed. In order to use the function the "speed"-canals of the pumps must be linked with
the wind fader in the DEPENCE-software. See also chapter 19.
se
Power Power
Supply Supply
24V DC 24V DC
+24V +24V
Anemometer
53913