Menu Overview - Syncronorm VNANO 512 Instrucciones De Uso

18

Menu overview

The following table shows the complete menu structure. A menu item can be selected within a level by
using the up and down keys. The next sub level can be selected by the cursor right key. The cursor left
key can be used to move back to a higher level.
Main menu Submenu 1
Start menu
1. Scheduler
Enable Scheduler
(On/Off)
2. Show
Stop Show
Run Show
XXXX.wds
...
3. Port IN
Wind Speed
4. Port Out
Toggle Out N
...
5. RDM DMX 1
Device List
6. RDM DMX 2
New Discovery
Submenu 2 Submenu 3
D#001 A001 Onl
Varionaut 150
...
Device ID
Reset Device
Identify Device
DMX Address
Device Info
Device Label
Device Hours
Manufacturer
Softwareversion
Personality
Sensors
Description
Show model type and current system time
Show operation mode of the scheduler
Activate / deactivate scheduler
Show running showname and time
Stop running show
Select one show from the SDCard and play show
Show status of digital inputs as 0/1
Show the current wind speed in meters / hour.
(if the wind anemometer is connected)
Show status of status of digital outputs.
Switch the outputs on or off by pressing ENTER.
Show the count of RDM devices at Port 1 or Port
2.
List of all RDM devices:
D#001: Device Number
SD#001: Sub device Number
Show the RDM Device-ID
The device receives the RESET command by
pressing ENTER.
Choose IDENTIFY mode for the device to
discover it on the field.
Show and edit the current DMX Address.
Show the RDM Device Info of the device.
Show the RDM Device Label of the device.
Show the operating hours of the device.
Show the manufacturer label of the device.
Show the version label of the firmware.
Show and select the RDM Personality of the
device.
Show the sensor values.
Clear the current device list and start search all
devices.
- GB -
43