Digital Outputs; Dmx Ports; Audio Output - Syncronorm VNANO 512 Instrucciones De Uso

13

Digital outputs

The device is equipped with eight configurable, galvanically isolated outputs for controlling third-party
systems. A maximum of 1 ampere per output at 24V DC can be applied to each output. If the device is
restarted the previously active outputs are no longer active.
In remanent mode an accidental switching off can be prevented since the value range must be
between 10 and 50. After releasing a show, the output can be held on till the next show. The mode can
be selected at 8.Setup
Do not use the unit to control safety-relevant assembly components.
Power Power
Supply Supply
24V DC 24V DC
14

DMX Ports

The DMX/RDM outputs are located on the lower terminals. Both the DMX1 and DMX2 ports are
designed for 512 channels respectively. For each port, the DMX+ terminal [D+], the DMX- terminal [D-]
and the shed/grounding of the cable are placed on the COM output. Corresponding to the plug-in
system: [5-pole socket plug], [D+] red, [D-] white, [COM] shield.
15

Audio output

For the VNANO 1024 Music , the audio output 3.5 mm jack bush (galvanically isolated) can be used to
control a sound system.
Mode
Standard
Remanent
Digital Outputs.
A2 A2
24V DC Relais 24V DC Relais
A1 A1
Value range Value
OFF ON
0..127 128..255
10..50 128..255
- GB -
range
41