Starting; Configuration; Setting The Time; Setting The Date - Syncronorm VNANO 512 Instrucciones De Uso

18.1

Starting

Now connect the device with a 15-24 V power supply. Re-starting the unit takes approx. 20 seconds.
After that the LCD screen displays the main mask of the operating/control system
VNANO 1024 Music/time). If the unit cannot be restarted correctly at this point, please check the
voltage supply and ensure that all connections are tightly fixed.
18.2

Configuration

Set the network IP address on the device.
On delivery, the IP address is set to 192.168.003.011.
Use the four arrow buttons
proceed to sub-level menu item
communication with a PC.
Set the IP address to the correct fixed IP address of your computer. Ensure that the IP address used is
part of the same subnet as the VNANO 512/1024 Music . If necessary, change the SubNet mask
accordingly.
For example: IP: 192.168.003.xxx, Subnet mask: 255.255.255.000
Device
VNANO 512/1024 Music
Windows PC
Ensure that the network address was only allocated once in your address space.
18.3

Setting the time

Use the four arrow keys
to menu item Time (UTC)
be selected from UTC (coordinated universal time) and CET (Central European Time, UTC+1) with
daylight-saving time. CET is the recommended choice.
18.4

Setting the date

Use the four arrow keys
to menu item Date
to get from the main level to the sub-menu item
IP-Adress . Use the
to get from the main level to the submenu item
. Use the function
to get from the main level to the submenu item
. Edit the current date in format: JJJJ-MM-DD.
Edit IP function to set the desired IP address for
IP-Address
192.168.003.011
192.168.003.020
Edit Timezone to edit the time zone. The time zone can
- GB -
(VNANO 512/time or
8.Setup . Then
8.Setup . Then proceed
8.Setup . Then proceed
45