Removing Packaging; Install Appliance; Mount To Cabinet - Gaggenau BOP 250 612 Instrucciones De Instalación

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Removing Packaging

NOTICE
To prevent damage to your floor keep the unit in its
packaging base until ready to be placed in the cabinet
opening. Do not slide the unit across the flooring.
Different models use different packaging materials.
Actual brackets may look differently. Bracket remains in
packaging base.
1.
Cut straps on outside of box.
2.
Remove cardboard box.
3.
Remove all top and side cardboard and Styrofoam
braces.
4.
Place oven in front of cabinets where it is to be
installed.

Install Appliance

Note: The appliance is heavy. It is advisable to install it
with a second person.
NOTICE
Before installing the appliance, be sure to verify the
cabinet dimensions and electrical connections.

Mount to Cabinet

Notes
When installing two appliances side-by-side, the door
handles must be in the center.
If there is no fitted shelf above the appliance, secure
the appliance against tipping over when the door is
opened. Fit two standard angles
the appliance at 17
3
/
cabinet.
1.
Do not kink or trap the connecting cable, or route it
over sharp edges.
2.
Centre the appliance.
There must be an air gap of
appliance and adjacent cabinets.
3.
Using a spirit level, adjust the appliance so that it is
perfectly level.
Preparing Kitchen Units
3
/
" (5 mm) above
16
" (450 mm) depth inside the
4
/
" (5 mm) between the
3
16
en-us
7
Tabla de contenido
loading

Este manual también es adecuado para:

Bop 251 612

Tabla de contenido