Removing Packaging; Install Appliance; Removal - Gaggenau EB 388 610 Instrucciones De Instalación

Removing Packaging

NOTICE: To prevent damage to your floor keep the
unit in its packaging base until ready to be placed in
the cabinet opening. Do not slide the unit across the
flooring.
1 Cut straps on outside of box.
2 Remove cardboard box.
3 Remove all top and side cardboard and Styrofoam
braces.
4 Place oven in front of cabinets where it is to be
installed.
5 Remove the securing clip from the handle and the
adhesive tapes that protect the door during
transport.

Install Appliance

Note: The appliance is heavy. It is advisable to insert
it together with a second person.
NOTICE: Before installing the oven, be sure to verify
the cabinet dimensions and electrical connections.
Installing under a worktop:
Before installing the oven, fit the included shielding
plate on the bottom edges of the worktop.
1 Push the appliance fully into the kitchen unit.
Do not kink or jam connecting cables or route
them over sharp edges.
2 Align the appliance in the center.
3 Use a spirit level to align the appliance exactly
horizontally.
4 Fasten the appliance with the included screws.

Removal

1 Disconnect the appliance from the power supply.
2 Undo the fastening screws.
3 Raise the appliance slightly and pull it out
completely.
9