To Install The Product With An All Thread Rod; Operation; To Do Before You Operate The Product; To Adjust The Angle Of The Drill Column - Husqvarna DS900 Manual Del Usuario

2. Use the mandrel and a hammer to install the
expander.
3. Install the anchor screw.

To do before you operate the product

• Read the operator's manual carefully and make sure
that you understand the instructions.
• Read the operator's manual for the drill motor
carefully and make sure that you understand the
instructions.
• Do the daily maintenance. Refer to
maintenance on page 10 .
1324 - 001 - 11.10.2019
4. Attach the product with the nut.

To install the product with an all thread rod

•
•
•

Operation

To adjust the angle of the drill column

The drill column can be tilted 0–60°.
Daily
Use an all thread rod to install the product to a wall
or ceiling.
Use an all thread rod when it is not possible to use
an expander bolt.
Use washers and nuts to tighten the all thread rod.
9