Cleaning And Maintenance; Brew Group - Saeco Vienna plus RI9737/20 Instrucciones De Uso

14
10 CLEANING AND MAIN-
TENANCE
General cleaning
• Maintenance and cleaning operations may only be
carried out when the machine has cooled down and
has been disconnected from the power supply.
• Do not immerse the machine in water or place any
of its parts in a dishwasher.
• Do not use sharp objects or harsh chemical prod-
ucts (solvents) for cleaning.
• Clean the pannarello after every use. Remove the
external part of the pannarello.
Wash the external part of the pannarello under
running water.
• For a thorough cleaning, remove the pannarello
from the steam spout.
Loosen the ring nut and remove the internal part
of the pannarello. After washing it thoroughly, reas-
semble it taking care to position it as shown in the
CLEANING AND MAINTENANCE - DESCALING
fi gure.
(Fig. 25) - Clean the water tank on a daily basis.
- Remove the fi lter in the water tank and wash it
under drinking running water.
- Reinsert the fi lter into its seat by gently pressing
and turning it.
- Fill the tank with fresh drinking water.
• Use a soft cloth moistened with water to clean the
appliance.
• Do not dry the machine and/or its components using
a microwave and/or conventional oven.
• (Fig.32) - Remove the dispensing spout by pulling
it outwards and wash it with lukewarm water. After
washing it, fi t it back in its seat by pushing it to its
limit stop.
• (Fig.31-34) - Clean the dispensing outlet.
We recommend emptying and cleaning (on a daily
basis):
- the grounds drawer (8)
- the drip tray (10)
10.1

Brew Group

• The Brew Group (15) must be cleaned every time
the coffee bean hopper is fi lled or at least once a
week.
• Turn off the machine by pressing the main power
button (5) to -0- and remove the plug from the
socket.
• (Fig.31-34) - Open the service door (13) and
remove the coffee grounds drawer (8), and then
remove the drip tray (12) as well.
• (Fig. 35) - Remove the Brew Group (15) by the
handle and press the «PRESS» key. The Brew
Group must be cleaned only with warm water and
no detergents.
• (Fig. 36) - Wash the Brew Group with lukewarm
water and carefully clean the upper fi lter.
• Thoroughly wash and dry all the parts of the Brew
Group.
• Thoroughly clean the dispensing outlet.
• Reinsert the Brew Group in the dispensing outlet
clicking it into place without pressing the "PRESS"
key.